新產品·新技術信息

聚氨酯木材地板膠粘劑提供聲音和濕度控制

來源：林中祥膠粘劑技術信息網2011年03月31日

閱讀次數：次

DriTac Unveils New Sound & Moisture Control Urethane Adhesive: DriTac SMC

For immediate release: DriTac Flooring Products has launched DriTac SMC, a new sound and moisture control urethane wood flooring adhesive. DriTac SMC is a one-component moisture cure urethane adhesive that offers major time and labor savings for the installation of hardwood flooring when a concrete moisture barrier or sound control membrane is required. Installers can now accomplish in one day, a task that normally takes two or more days to complete, dramatically increasing productivity.

Manufactured in the USA, DriTac SMC is a one-step system that is designed specifically to reduce the time and labor associated with sealing a concrete substrate, or adding a sound control membrane in preparation for a glue-down hardwood flooring installation, by combining all of the attributes of four different products in one four-gallon pail.

DriTac set the standard in 4-In-1 Total Flooring Solution Products when it introduced DriTac 1001 All-In-One in the spring of 2008. DriTac 1001 All-In-One was the very first urethane 4-In-1 Total Flooring Solution Product offered in the marketplace. Along with DriTac 1001 All-In-One, DriTac SMC is a revolutionary product that will help change the way hardwood flooring is installed.

DriTac SMC reduces moisture vapor transmission in concrete substrates from as high as 12lbs per the ASTM 1869 Calcium Chloride Method Test. It also allows up to 85% Relative Humidity (RH) per the ASTM 2179 Relative Humidity Test. DriTac SMC forms an excellent sound control membrane and is a crack suppressant as well, bridging existing cracks in concrete substrates up to 1/8" INSERT INTO [lzx].[dbo].[tb_new]([id],[type],[title],[source],[personal],[image],[contents],[time],[number]) VALUES (3 mm).

This sound and moisture control urethane adhesive is VOC compliant and helps contribute to LEED point qualifications. It contains no water, cleans easily when wet and provides a strong, permanent bond. DriTac SMC is approved for use with on-grade, or above-grade concrete substrates and plywood subfloors. This product was developed to be easy to spread and is approved to install the following hardwood flooring types: exotic multi-ply engineered plank wood, multi-ply engineered plank, acrylic impregnated multi-ply engineered plank, acrylic impregnated plain-back parquet, and plain-back parquet.

DriTac Flooring Products, LLC is celebrating over 55 years as one of the oldest and most experienced manufacturers of environmentally friendly adhesives for flooring in the market today. DriTac adhesives are available from coast to coast through more than 100 distributors and in warehouses including: Clifton, N.J., Dalton, Ga., City of Commerce, Calif. and Dallas, Texas. For more information, or to receive a complete products guide for all of DriTacs adhesives and installation products for wood flooring, contact: John Lio, 60 Webro Road Clifton, N.J. 07012; Ph: 800-394-9310 ext. 243; e-mail: jlio@DriTac.com; or Web: www.DriTac.com.