AGC推出氟樹脂類粘合劑Fluon® ETFE LH-8000。該產品粘合性能先進，可粘接異種材料，比如聚酰胺,聚乙烯以及金屬等。

　　原文如下：

　　AGC Chemicals Americas Inc. has added a resin to its LM-ETFE AH series of adhesive fluoropolymers. Fluon® ETFE LH-8000 exhibits advanced adhesive properties that allow it to bond to dissimilar materials, such as polyamides, polyethylenes and metals. The adhesive functionality of Fluon LH-8000 is ideal for producing multilayer structures in a one-step process without surface treatment and by often eliminating the need for a tie layer.

　　LH-8000 has chemical resistance and electrical and non-stick properties equivalent to conventional ETFE resins. However, it is an ultra-low-melting resin that is cost-effective for applications such as chemical bags, hot water hoses, rubber hose mandrels, anti-stick conveyor belts, multilayer monofilament, interlayer insulation film for electronic substrates and tubes that convey harsh materials in the chemical, plastics, oil and gas, building and paint industries.

　　“Processors and molders using Fluon LH-8000 can reduce their initial investment because a fluoropolymer layer can be co-extruded with conventional engineering plastics, like HDPE and PA, without the need for special corrosion-resistant equipment,” said AGC product and development engineer Katie Sprick. Fluon LH-8000 has an ultra-low melting point of 180 °C to 190 °C, the lowest of all of AGC’s AH series resins. It also offers the widest processing temperature range between melting point and onset of degradation (350 °C) among all of AGC’s Fluon ETFE products. This large processing temperature window minimizes any possible material decomposition.

　　In addition, the corrosive off-gas levels at melt processing of Fluon LH-8000 are very low, minimizing damage to the molding equipment.

　　關于AGC(Asahi Glass Company Ltd.)

　　旭硝子玻璃股份有限公司(日語：旭硝子株式會社)，是日本一家玻璃制品公司，為全球第二大玻璃制品公司，1907年成立至今超過一百年。旭硝子產品為各種玻璃制品與半成品，及少量化學產品，目前銷售對象為LCD制造廠，汽車業(yè)、燈具業(yè)、建筑業(yè)等。

　　公司經營范圍：玻璃產品、陶瓷及耐火材料。曾以1.36億美元收購ICI公司的氟樹脂業(yè)務，使其全球市場份額從6%增到18%。